Posts

Showing posts with the label cutting grass

First Cut - Lawn - May 2023

Image
I waited as long as I could: but, I finally cut the lawn last week.  Posting this on Wednesday, May 3rd, but I ended up cutting the lawn on Thursday,  April 27th.  It was long and ready for a cut.  Here, below, is a peek at the deep-green color of the lawn right now.  It never looks better than mid-Spring. I cut it on the 4-setting on the mower - that's two slots from the tallest.  One of my 2023 items on my lawn care list is to try to cut front a bit lower, so this 4 setting is exactly where I was last year.  My 2022 list says that I cut the front on 6 in 2020.  5 in 2021.  So, it was 4 in 2022 .   This first mow, I used the bagger to keep the cuttings out of the lawn.  As I get more regular, I'll switch to mulching it in as I've done every other year. 

Front Lawn Cut Length and Domination Line - August 2021

Image
Putting a few things in the [ lawn diary ] in this post: cut length + domination line.  First, the cut length.  Back in June, I posted about how I was using Hydretain to try to reduce watering while bringing my front yard lawn down one notch on my mower - to 4 out of 6.   The past few Summers, I cut the lawn at 6/6 and while it was dark green and lush, it started to fall over a bit and was probably *too long*.  I mean...the lawn looked great ( 2019 early August when it should be failing ), but I wanted to push things a bit this year and see if I could handle the shorter cut. I posted this image in 2019 showing how when my mower was set to 6/6, I was getting between 3.5" and 4" of grass length .  Knocking two spots off the mower height setting, I'm now seeing between 2" and 2.5" of height right now.  See below for the current length: So far, so good.  We'll check back in with the lawn in late August after the full month of hot, hot heat has beaten the turf

Shorter Mow + Applying Hydretain to Front Yard Lawn - June 2021

Image
I decided to do a couple of (new to me) things with my front lawn this year including some of the things that I've already covered like spoon-feeding a granular with Sea Kelp (applied at end of April and end of May - so far) .  But, this post is intending to cover two other new (to me) things:   First... I'm cutting it shorter than I've done in the past.  For the past couple of years, I put the mower ALL THE WAY up and cut at that length. I had a deep green lawn through most of the Summer and didn't get killed with a water bill.  But, the length came at the cost of neat-ness.  My e-Go mower doesn't have a ton of vacuum power, so there was always a lot of folded over blades. So, a risky change:  This year, I'm putting it on the 4th 'notch' out of the six on my Ego walk behind push mower.  Last year, I was cutting at six.  See below for the difference - which is about an inch shorter. And the second new (to me) thing - which is a companion to that shorter

2020 - First Mow

Image
I broke out the mower and hit the (entire) front yard including the parkway and *just* the high spots (thanks, Lizzie) in the back yesterday with my first mow of the season.  I mulched it, but with all the little debris on the lawn, the next time, I might bag it to see what I can get up before the grass grows too quickly this Spring. So far, I'm seeing some good green-up and what appears to be a healthy lawn.  The biosolids on the parkway haven't worked their magic just yet, so it remains to be seen if I can replicate the success we had with the test patch .  My goal for the coming week(s) is to get the Automower boundary wire reset and get it going on the backyard with the new configuration.

3.5" to 4" Kentucky Bluegrass Lawn Height - End of Summer 2019

Image
I have been keeping the grass in front longer than I normally have in the past.  I should say...the *I* and *normally*  here aren't quite fair, as this is the first year that I've been cutting my own front yard after having a service do it the past few seasons.  I wasn't that satisfied with how they were cutting it and after doing a bit of research into the whole turf-building process, I've learned quite a bit and have changed some things. This post is about the length.  You can see that it is somewhere between 3.5" and 4" tall with some blades reaching even higher than that.  But, those blades aren't the normal - and haven't been cut.  Between the low suction on the Ego Self-Propelled mower and having the wheels 'bend' the blades in some cases, there are - on occasion - some blades that are higher than others.   This is Kentucky Bluegrass and I've been mowing it on the second highest setting on the mower.  A month ago, I posted

Go-Go Debuts in our #NewOldBackyard

Image
That's our Husqvarna Automower back in business, but in our #NewOldBackyard.  I've written a few times about our Automower here on the blog .  And, on my linkblog/other note-taking/link-saving thing, I even chronicled how we arrived at his/her name :  Go-Go. We had Go-Go installed at Equation Boy/Man's place, so when we were moving out, I went around the perimiter of the lawn and picked up the boundary wire and stakes.  When we got to the #newoldfarmhouse, it took me a few weeks to find the time to spend in the yard putting the boundary (and guide) wires in around the edges of the yard.  Our #newoldbackyard is quite a bit bigger, so the wire installation kit that I ended up buying was the 'medium' version and as it turned out, we had *just* enough wire.  Like maybe 10 extra feet total.  And that's after deciding to not have Go-Go cut certain parts of the current lawn.    All the way in the back there's a densely shaded area that doesn't really have