Why I Oughta...

Putting a few things in the [ lawn diary ] in this post: cut length + domination line.  First, the cut length.  Back in June, I posted about how I was using Hydretain to try to reduce watering while bringing my front yard lawn down one notch on my mower - to 4 out of 6.   The past few Summers, I cut the lawn at 6/6 and while it was dark green and lush, it started to fall over a bit and was probably *too long*.  I mean...the lawn looked great ( 2019 early August when it should be failing ), but I wanted to push things a bit this year and see if I could handle the shorter cut. I posted this image in 2019 showing how when my mower was set to 6/6, I was getting between 3.5" and 4" of grass length .  Knocking two spots off the mower height setting, I'm now seeing between 2" and 2.5" of height right now.  See below for the current length: So far, so good.  We'll check back in with the lawn in late August after the full month of hot, hot heat has beaten the turf

I decided to do a couple of (new to me) things with my front lawn this year including some of the things that I've already covered like spoon-feeding a granular with Sea Kelp (applied at end of April and end of May - so far) .  But, this post is intending to cover two other new (to me) things:   First... I'm cutting it shorter than I've done in the past.  For the past couple of years, I put the mower ALL THE WAY up and cut at that length. I had a deep green lawn through most of the Summer and didn't get killed with a water bill.  But, the length came at the cost of neat-ness.  My e-Go mower doesn't have a ton of vacuum power, so there was always a lot of folded over blades. So, a risky change:  This year, I'm putting it on the 4th 'notch' out of the six on my Ego walk behind push mower.  Last year, I was cutting at six.  See below for the difference - which is about an inch shorter. And the second new (to me) thing - which is a companion to that shorter