Posts

Showing posts with the label lumber projects

Backyard Retractable Hose Reel Mounted to 6x6 Post - May 2023

Image
Beginning in Spring 2022, I have talked about installing a second yard hydrant in our backyard featuring a self-rewinding hose reel.  I included it on my 2022 to-do list and failed to install the post and reel in 2022.   I carried that task over to our 2023 list and put it at #5:  install a second hose reel .  I had the hose reel for more than a year, so it was simply a matter of installing the post to hold the reel. This is the third of these reels that I have at the house - the first one is in the garage .  The second one is about half-way back attached to our fence .  This third one is planned for close to the spigot.  I have historically used a loose hose to water the patio containers.  I thought this upgrade would keep things a bit more tidy.   Ahead of digging the hole, I called J.U.L.I.E. and had them mark any underground utilities.  In the photo below, you can see the red line for electrical underground.  And the orange stake is where I wanted to dig the post.  All clear.  I c

DIY Firewood Rack for Backyard - Filled with Ash and Hackberry - August 2020

Image
A few days ago, I showed off some photos of a firewood rack that I built from scrap lumber in anticipation of our annual Fall firewood order .  In that post , I mentioned that I had some additional scrap lumber around (some treated, some not) around to build a few more racks.  This post, shows at the top another rack that I built from the same basic plans.  The photo above, shows this second DIY firewood rack that I built and placed along the fence in the far back part of our yard.  It is holding just about a face cord of mostly Ash and a little bit of Hackberry/Osage Orange firewood that I acquired form next door in December of 2019 .  I started processing the rounds and by March of this year, had the wood stacked on itself along the fence.  You can see that firewood stack in the post here .  It was fine.  But, it was mostly laying on the ground and I thought I could do better.  So, I took the lumber and got started.  The bottom ledge in this version is large - a 2x10 and I had e