Why I Oughta...

Yesterday, I posted some photos showing how I used the "Lasagna Method" to smother some grass with cardboard and top-it with mulch to improve a foundation-adjacent garden bed on the side of our house.  The goal was to raise up the soil level, smother out grass and improve the area looks-wise.   But, that wasn't the only recent improvement that I completed over on that side of the house.  While I was using gravel and river rock to level-out the pizza oven site, I decided to take a couple of bags of the River Rock to put to work by the downspout surface drain outlet.   I've been wrasslin' with surface water on this side of my house for years - here's a post from 2020 where I talk about 'floating mulch' due to the downspout release .  Over the years, I've seen the area erode and this Spring, I've attempted to address it in a few ways.  First, by hauling over some of the excavated material from the pizza oven project to 'fill in' some low

I last added ten (10) bags of gravel to the excavated wood-fired pizza oven construction site to begin to level the area.  As a reminder, this is being built on-top of our drywell, so this gravel layer is an extra insurance policy for drainage below the slab in hopes of avoiding heaving.  When I added the ten bags, I noted that I thought I'd need another round of gravel to finish the project.  Before heading to the store, I eye-balled the site and decided that I needed a bit more material on the western edge of the site.  Thanks to a sale, I decided to add six (6) bags of River Rock to that side.  Thinking that the larger size of the rocks would fill in the deeper portion of the dig - that part is going to *mostly* be outside the footprint of the foundation.   Here's the site after six bags of river rock added to the left side (note the different color): Below is the Menards item # for the River Rock - 180-2006.  Normally priced $3.49 per bag, it was on sale for $2.24.   I'

This past Winter, I identified that we were experiencing some 'sinking' in the gravel walkway on the side of our house .  I put it together using Bluestone Chips and some metal edging, but starting last year, I noticed that the 'level' of gravel seemed to be going DOWN with time.  Looking back, when I installed the path in 2021, I went pretty 'thin' with the Bluestone chips on the path - because I used MOST of them back by the firepit.   Last Summer, I made a couple of trips to the landscape supply yard and brought home 50 gallons of stone that I applied to the firepit area and the side path.  I thought that'd be enough to raise the level of the stone.  But, alas...it still felt like it was sinking. So, fixing this 'sinking' gravel on the path is something I want to take-on in 2024.  I even included it in my 'early look' at 2024 projects .    There are a number of (potential) methods that one could use to try to keep the gravel from sinking

The last progress-report on our backyard pizza oven was earlier in March when I showed the cut-down concrete slab framing pieces (2x6's) that I cut to the final dimension s (Slab: 78" wide, 86" deep. 6.5' wide, 7'2" deep. Stand: 72 wide, 80 deep - 4.5 blocks wide, 5 blocks deep).  In that post, I talked about the next step is to fill the excavated cavity with gravel ahead of the rest of the slab prep. I went over to Menards and picked up 10 0.5 cubic foot bags of their multi-purpose gravel.  Each bag is supposed to cover about six square feet.  I wasn't sure how far these ten bags would go, but I figured that was about the limit that I wanted to push my car weight-wise.   I brought the ten bags home and hauled them (one-by-one) to the site and piled them up: Opening each bag and spreading it out, I quickly discovered that I was FAR short of the amount of gravel that I REALLY needed to complete the project.  Below, is what the site looks like after ten ha

Over the past few years, I've been adding Bluestone Chips to a path on the north side of our house that takes you from our driveway to the back/side boardwalk.   One of the items on my 2024 to-do list is to sort out what is going on over there.  Is the gravel sinking in?  What do I do to remedy the situation?  Larger gravel?  Some sort of grid?    Next Summer, before I add more Bluestone Chips, I need to diagnose the failure and implement a remedy.

A few towns over, we have a landscape supply place that is open-to-the-public and offers some of their bulk items like mulch and stone on a 'you fill' basis.  That means that you bring your own buckets and shovel and they sell it to you by the gallon.  NOT by the weight.  Well...I sort of guess that they've priced it 'by weight', but they sell it by the gallon.  They want you to bring in five-gallon buckets as that's the easiest way to go.   We have a short sideyard path and our firepit ring filled with Bluestone Chips that we installed in Summer 2021 that have worked out well for us in both spots.  But, when I installed them, I used whatever Bluestone chips that we had on hand - I made one order.  So, I spread them a little thin because I wanted to fill in both spots (path + firepit) to make both viable.   Part of my 2023 to-to list was to keep upgrading the firepit area and in that post, I mentioned adding some new Bluestone chips to the firepit ring would

I've talked about how our yard, beds and even view of our house from the street has changed since we moved in back in 2017.  At that time, we had a house next door (to the north) that was sitting closer (than our house setback-wise) to the street and had a driveway that wasn't right on the property line.  With our new neighbors building and moving in a couple of years back, that changed.  They upgraded the property and house in a MASSIVE way.  And...they're just good neighbors and nice people.  But, they did upgrade the property in so many ways.  In doing so, they built their new house a bit further back from where the old, smaller house was situated.   As a result, that 'view from the street' that I mentioned changed a little bit.  It changed when you are coming south on our street/sidewalk and 'see' our house.  What used to be hidden (mostly) due to landscaping and the old house was the side of our garage.  It is a big, mass of wall with no windows.   Here

Earlier here on the blog, I posted about the idea of a 'fountain wall' right next to our patio and mentioned that I thought there was an 'order of operations' post that needed to come first to ensure that I had all of the pieces sorted out and that any project that I took on would not have to be REDONE when I moved on to other projects.  However....in order to get to that 'order of operations' post, I think I need to lay out a few more of the building blocks/underlying projects that make up the choices I have to make.   One of the biggest ones is to finish up solving the 'entrance' to our backyard.    I've gone around-and-around on how to best solve the situation I'm facing:  a gradient that transverses the path we need to complete from our front yard (driveway) back to our patio. Last year, I put in a gravel walkway that covers half of the area .  And, we love it.  But, I can't simply lay down a gravel walkway for the rest of this walkway b

Six weeks ago, I posted a photo of part of our garden path on the northside of our house that we installed this Summer that featured a metal edge and a thick layer of Bluestone chips for the gravel.  In that post (from early August), I showed a view from a concrete landing forward to the gate on our fence .  The Bluestone garden path extends PAST the gate and (now) connects our driveway with our backyard.  Or....mostly does.  There's still another section to do that I think we're going to have to do in pavers with a retaining wall.   But, I wanted to capture in the [ garden diary ] how the path works with the driveway.  You can see below how I flared the edging out to make a wider birth and tapered it back to a 48" wide path as it makes the curve around that Vanilla Strawberry Hydrangea.  As I said back in August, this project wasn't on my 2021 to-do list , but it should have been.  It was something that we NEEDED to get done and now gives me a bunch of opportunities t

  Getting this project done was *NOT* on my 2021 to-do list , but it should have been.  Although, I'd hesitate to call this project 'done', rather more like (this part) being 85% done.  The edging is installed (and has been for a month or more) and now I've put down the minimum amount of bluestone chips gravel, so the path is no longer a muddy mess.  The dark spots you see above are because I tried this path with larger paver/steppers laid in the ground with gravel around them, but it wasn't working.  So, I yanked them out and put down additional gravel.  They will dry out and the whole thing will look uniform in a half-a-day or so. This area has the firewood racks on the left and some random hostas and ferns that I've stuck here over the years on the right.  But...in looking at the inspiration photo here ...not too bad, right?   I still have to extend this path all the way to the driveway, but for now we've solved the most pressing part of the walkway that

Last month, I posted some photos showing off the new shape of our backyard beds - in a curvilinear form - and talked about how these were the 'final form' of the beds.  The idea that this was the final shape/form of the beds lasted about three weeks.  We decided we need to add another area and cut out even more turf.  Before we talk about what we're doing, let's first understand the backstory, current state and a little bit of inspiration that Nat found that we're trying to bring to life. We've had a sort-of DIY firepit area in the far backyard that was made up of wood chips that I picked up from the Village Mulch Pit and bricks that we scavenged from our neighbor's house when they tore it down.  You can kind of see that area in this post about some hostas and this post where I showed off the latest firewood rack back there .   That is in one back corner.  And the kids' trampoline is in the other back corner.  We also have a gate in one corner that the