Not a better crew to be rolling with on the shopping cart escalator ramp at Menards than these three.
I mean....What more could a guy ask for? And with Momma gone for the weekend, there's no place we'd rather be than Menards early on a Saturday morning.
My father-in-law gifted me this Sears Craftsman 8-function Multimeter for Christmas and I've just gotten around to unboxing it and finding it's permanent home in my shop. I wasn't quite sure what to do with a multimeter (or multi-meter as it is sometimes spelled), but Nat's Dad also sent along with CNET piece that explains all that this tool can do . Here's the list: 1. Test batteries 2. Check extension cords 3. Determine the life of lightbulbs 4. Identify the 'hot' wire 5. Find bad switches So...turns out, it wasn't all bird stuff at Christmas this year, right?!?
Earlier this winter, I wrote about the old Lou Malnati's menu and mentioned that as I was waiting around for my pie to finish up, I spied an old Chicago Tribune article posted on the wall that included the original Lou Malnati's Italian Salad Dressing Recipe. The Tribune reporter called it "prized". We were set to host a little pizza party over the weekend, so I figured I'd give it a shot. Here's the article as seen through my mobile phone's camera. I'm not a wine drinker, so the fact that the recipe called for Burgundy wine didn't strike me as odd. I went shopping at Angelo Caputos in Addison - a really incredible shopping experience - and when I got to the wine section I found Burgundy wine was carried ONLY in those HUGE jugs. And they were dirt cheap. The only issue is that needed just 4 ounces. We ended up with a whole-lotta-wine that Nat won't drink. I've taken the recipe and modified it a bit by eliminating the percentage
Yesterday, I shared a photo of our eight Frans Fontaine European Hornbeam 2.5" caliper trees that had been delivered . These trees were a long-time coming and we've been planning, talking and thinking about them for almost a year. Today, the trees went in! Here's the guys digging the holes and placing the trees in the holes to check for placement and spacing. We ended up going with six feet of spread between each one and 30" away from the fence. You can tell from the photo above that they are going into a low spot and that our neighbor's to the north truck and garage are pretty visible (right now) from the top of our property. Here's three of the eight placed in their holes. Once we were all happy with the placement, the burlap and rope were removed (well...the bottom of the burlap was left on because our landscaper prefers to keep the rootball intact, but the top of the burlap was cut off and all the rope was removed) and these trees were stuck ba
Comments
Post a Comment
Be nice to each other here.