Why I Oughta...

It is finally time to call a couple of dead trees:  Three Japanese Maples didn't come back this Spring.  They tried - leaf'd out from the graft - but now...they are foliage-free.  Two of them are from Mr. Maple - the upright Seiryu Japanese Maple and First Ghost - back by the firepit.  Both...are now on the LOST TREES list.  The Seiryu is one that I really was keen to see grow as I planted it in the shadow of the dying Flowering Cherry Tree.  That tree died last year, and now the JM is gone, too.  That leaves a big empty opportunity for a shade-tolerant tree.    The last one was the Inaba Shadire high-grafted tree.  Below are a couple of photos showing the skeletons of these Japanese Maples.  First the Seiryu followed by First Ghost.   Sadly...these are the fourth Japanese Maples that didn't make it just this year - with the unknown laceleaf tree from the orange big box store was pulled and replaced by an Emperor 1 earlier this Spring.   I've now planted ten Japanese

Late Summer 2021, I planted the first three Hakonechloa Macra Grasses (the standard, green ones) from Northwind Perennial Farm in the border right around our tree swing tree.  I had some All Golds in the ground prior to 2021, but I read about the green ones online and when I saw them, I bought them as one-gallon nursery pots.  The All Gold variety have been slow growers (for me), so I wasn't sure what these would do when they matured.  I documented them in their first Spring ( May 2022 ) and then one year after planting ( August 2022 ) - when they had put on some growth. Last Summer, I added four more (behind the tree) and this Spring, I moved them (a garden edit) to sit next to the three original ones on the border.  Those four are two seasons behind and the move set them back with a little transplant stress.  But the three original?  They're starting to fill out the space and REALLY shine in the garden.   Below is a look at the three original Japanese Forest Grasses in our

Yesterday, I showed how I built a platform for the Mudmixer in order to pour the raised hearth in our backyard wood-fired oven stand construction project.  Today, we show the details of the actual pour.  Using the Mudmixer and 35-or-so 60# bags of 4K PSI concrete mix, I was able to complete the job in just about an hour of run-time.  I spent quite a bit of time trying to make sure the forms were level and square and using a mix of sand (to fill cores), caulk and backer rod, I filled as many of the gaps in the forms as I could to keep the slab from leaking too much. The good news - the forms held.  They didn't bow.  And...they didn't leak that much.  Same with the supports under the Densshield boards.  Below are a few photos showing the raised, reinforced hearth pour.  The first one shows the platform and the poured hearth: Below, you can see the drain pipes that were able to sit right at the surface of the hearth: Below are a couple of shots showing how snug the Mudmixer was to

A few days ago, I shared an update on our DIY backyard wood-fired pizza oven build that showed the latest progress:  the installation of the final rebar and bracing (wires) for the raised, reinforced concrete hearth.  I'm set to pour that 4.5" thick hearth (plus the filling of the pressed bond beam block cavities (so...around 8" deep around the perimeter and 12" deep across the opening spans), but the forms of the heart sit 42" above grade.   Like I did with the foundation slab, I'm planning on using the MudMixer to help pour the concrete.  The problem that I'm facing is that the Mudmixer's chute stands just 16" from the ground.  That means....that I have to either use buckets to lift the mixed concrete up from the Mudmixer chute or....raise the Mudmixer to allow it to 'POUR' directly into the raised hearth. If you look back at this post where I showed the foundation slab pour, you can see that I made a platform for the Mudmixer to allow

What a difference two weeks make.  Earlier this month, I posted about our Disneyland Roses and described them as 'struggling '.  This is the second year where they 'struggled' - including an infestation of Sawfly Larvae.  The three bareroot ones didn't come back this season and I suspect it was the result of the pests.  As I've done in previous years, I've begun to feed the three remaining Floribunda roses with a combo fert + systemic insecticide on the first of the month (May, June).   But, that wasn't enough.  The leaves of the roses were lace-like and the plant seemed to be in decline. That's when I took drastic measures and first sprayed Neem Oil on them every few days follwing by  bombing all three of them with Eight insecticide dust .  The remaining foliage had a ghost-like quality with the white dust clinging to the leaves and stems.  For days and (now) weeks.     These Disneyland roses grow in 'flushes'.  At least that's what I c

The larger, more-showy Alliums are long gone.  Bloomed, were show-offs, and now all that is left behind are husks of their former glory.  But, not Drumstick Alliums.  I planted 50 Drumstick Allium bulbs back in the Fall of 2021 .  And didn't think much about it.  In fact, I'm not sure they were planted in the right spots.  But today?  I'm finding them to add a nice little pop of color to our garden and think I should plant even more this Fall.   I have them IB2DWs, in back and on the side of our house.  They are blooming right now - mid/late June and they work well (for me) when they're interplanted amongst other things so the little purple flower head sort-of peeks out.   My Fall 2024 bulb planting should include more of these.  I could see a big MASS planting and/or interplanted in lots of places.  

The last I posted about my DIY backyard wood-fired pizza oven, I shared how I made and mounted the forms for the reinforced hearth on top of my cinder block stand.  With the forms set-up and square (and level), I began to finalize the rebar setup.  I ran a couple of rows around the flow-thru bond beam blocks that made-up the top row of the stand.  Before doing the rest of the rebar, I laid down a couple pieces of vapor barrier on TOP of the tile backer board segments.  Once in place, I ran vertical rebar up the filled cores from the foundation slab, through the block stand and out the top.   I tied a grid of 1/2" rebar together and spanned the hearth with seven pieces each direction.   I used zip ties to tie them together and some block fragments to elevate the center part of the grid.  On the edges, I tied this rebar grid directly to the vertical posts.   Once that was done with the rebar, I cut up some one-foot segments of 1/2" pvc and drilled holes through the tile backer