Why I Oughta...

Here's a truth:  Staghorn Ferns take work.  I said that as #19 on my 2023 to-do list and while I've had ups-and-downs with my Staghorn Fern collection, I'm sharing a small win today.  In terms of Staghorn inventory, I (now) have two mounted ferns and one container fern.  One of the mounted ferns is troubled, but the other one?  It seems to be doing well.  Why do I say that?  Because I'm seeing shield fronds emerging.  Some?  Yes.  Two of them.  See below for both of the shield fronds on a mounted Staghorn Fern: I haven't had much success with the growth of these shield or basal fronds, but earlier this year the Staghorn in the container threw up a big, green basal frond .   I have one empty board as the Elkhorn Fern that I mounted last Winter didn't make it through the dry conditions inside.  

A few days ago, I shared a mid-Winter update on my Staghorn Ferns and mentioned that I was going to share a separate post on the lone Elkhorn fern that I mounted in October .  First thing though....I'm pretty sure that the name "Elkhorn Fern" is probably misplaced.  This is likely just a variety of Bird's Nest Fern, but that's ok.  And...not the point - right now.   This is a six-week update on the Elkhorn since mounting. And, it hasn't been pretty. Below is a look at the current state.  Lots of brown.  And lots of unhappy fronds.  But, a really nice cedar mount.   Not great.  See below: Not great - at first glance.  But...upon closer inspection, I can see some new, small, thin fronds.  New growth?   One note that I've observed in the past six weeks.  This Fern requires more water, more frequently than the Staghorns.  

Currently, we have three Staghorn Ferns and one Elkhorn Fern (More on the Elkhorn in a separate post) that have been sitting in our basement windows trying to survive the long, dark Winter.  Two of the Staghorns are mounted to boards.  And one continues to be in the container that it arrived in from the big box nursery. First up, the one in the container.  This is the oldest Staghorn and seems to be doing fine .  Not great.  But, fine.  The shield frond is the original one that is now brown and dried out.  We have a few antler-shaped fronds, too.  See below for current state. This can use a repotting and/or mounting this Spring. The next Staghorn Fern is the original fern mounted to a pine board with a large knot hole in it.  I posted about this one in August when I talked about it suffering .  How is it doing today?  Not great.  But...I *think* it is growing.  There are some small, new, non-antler-shaped fronds that have ...

Number 8 on my 2022 to-do list for the season was to 'do more with houseplants'.  I talked about repotting a cactus, working with my topiary and mounting some Staghorn Ferns.  I recently covered the current state of the Mickey Mouse standing Creeping Fig Vine topiary, so that's in a good place .  I haven't gotten around to the Firesticks cactus repotting, but maybe that's a Winter-time project.  I've also continued to prune the Umbrella plants in our kitchen, so let's call that bonsai-adjacent. The most recent project in this category has to do with Staghorn Ferns. What started with a single, potted Staghorn Fern turned into a houseplant project and set of gifts for people in our life.  I bought five new potted Staghorn Ferns this Spring and ended up mounting (in total) four of them.  Giving two away, that left me with two mounted Staghorn Ferns and two potted ones. The smallest mounted fern that I kept perished and died.   The larger one, well....

Back at the end of February, I started to explore how to mount Staghorn Ferns to boards and even gave a few away as gifts.  I ended up keeping a few for myself and I wanted to put in an entry in the Staghorn Diary on the current state.  Below, you can see a photo of the one, larger Staghorn that is mounted to a flat board: Notably....it is NOT happy.  It is NOT thriving.  But, it is alive.  And has survived a battle with MOLD and moisture.  It has lost fronds.  Most of the tips have browned-up and curled.  But...we might have turned a corner.  We *might* have new growth emerging.  I dreamed of a life of Staghorn Ferns in our screened porch.  And this first year?  It has been rough. The interesting part is that the Staghorn that I gave my Mom?  It is thriving.  She has it laying on its back in a sunny, Western-exposure window.   I had a second, mounted fern (tiny) that has totally died.  I'm now left wit...

I've now put together my fourth Staghorn Fern that is mounted on a board.  But, just the second one that I've kept for myself; the first one being the tiny one I posted about last week . I gave the first two away as gifts, but after those initial mountings, I had three Staghorn Ferns in containers that I needed to do something with.  So, I got busy mounting another, large one. This is the third of four of the good-sized plants that I bought at Home Depot in February .   I mounted this one - just like the other ones - on a board with a Sphagnum Moss base and 'volcano' using some fishing wire and drywall screws.  The board has a knot hole on it, so I mounted this one a little lower so you can *see* the hole in the mounting board.  Here, below, is the new fern mounted and hung on the wall in my office. Here, below, is a profile shot showing how far the Staghorn Fern sticks out from the board.  One of the things that I've been thinking about is adding a so...

I've owned a Staghorn Fern (Dutch Staghorn) for almost a year, but it took buying a second, smaller one to finally compel me to get it properly mounted on a board and hung.  And, now, it has a home on the wall in my office.  You can see the mounted board below, hanging on a peg near a corner that looks at a western-facing and northern-facing set of windows.   My current plan is to keep my mounted ferns on boards in my office during the cold weather, but as soon as the temperatures improve, I'll get them out on the screened porch along with my other containers.  Below, you can see the mounted Dutch Staghorn Fern - a small one - on a board with Sphagnum moss as the base.  I used 1-1/4" screws around the perimeter and fishing line to keep the moss down and attached.   One of the things that I'm going to adjust - going forward - is using a more water-hardy species of wood.  I used pine because I had it on hand, but that's not the best choice....

This is now - unofficially - Staghorn Fern Week - on in my garden diary.  This is the third post in as many days about Staghorn Ferns starting with my first post about bringing home a small 4" Staghorn Fern that the kids and I mounted on a pine board .  Then, yesterday I posted a little story about how I found four 6" - and more mature - Staghorn Ferns at Home Depot and decided I was going to make up a few mounted ferns for Valentine's Day this year.  In that first post, I showed a little look into how we (the kids and I) put together the first mounted fern.  Here, below, is a closer look (with more photos) of how I put together one of these larger Staghorn Ferns using the same process.   I started this larger, more mature Staghorn with the same size board, but I used a larger bowl to make a slightly larger circle.  Below, you can see the circle I drew in pencil along with the 1-1/4 narrow-threaded drywall screws that I put around the circumference of...

After experiencing the joy of mounting our first Staghorn Fern on a board that I shared yesterday , I decided that I was going to do another one and give it away as a Valentine's Day present to my Mom.  So, one evening after work last week, I ran out to Home Depot.  Now, we live in a spot where there's a "close" Home Depot.  That's the one I normally go to on most occasions.  It is a normal HD in terms of size and inventory.  But, we also have two other Home Depots that are *pretty* close.  Like a couple of minutes further away - but in different directions.  One of those other Home Depots is one of their MASSIVE stores.  I don't know if you've been in the B I G Home Depots, but some of them are just bigger than others.  And that means that the garden center is usually bigger than most.   Because I KNEW what the inventory was of my "normal" Home Depot was (in terms of Staghorn Ferns), I figured...why not run to the large one.  ...

Yesterday I posted a couple of photos of our second Staghorn Fern - a tiny one that we bought with the intention of trying to mount it to a board - as is typical for these kind of ferns.  Having poked around the Web and watched dozens of YouTube videos of how-to's, I settled on this process: 1.  Find board, cut to size. 2.  Seal said board.  I used a can of clear coat spray that I had on hand.  Don't think this is necessary, but since you dunk the board AND fern in water to keep it hydrated, I figured this little extra step couldn't hurt. 3.  Draw a circle on the board, a little bigger than the container it arrived in. 4.  Drill a couple of short screws in the back that I can run picture-hanging wire from.  I did these first, because I figured that once the fern was mounted, I wasn't going to be able to flip it over and apply pressure with an impact driver to get these screws in. 5.  Flipped it back over and laid down a temporary piece of wo...

My journey with Staghorn Ferns starts where a bunch of my gardening, craft and DIY interests came from:  Martha Stewart.  Back in the aughts, we used to get Martha Stewart Living magazine delivered in print.  In one of those editions, she covered Staghorn Ferns.  That was my first exposure.  I found this old, 2008 Martha Blog post about her Staghorn Fern that might have been *around* the time of the print piece.  Since then, they've been on my radar.  She posted again in 2018 when she talked about mounting a few new Staghorn Ferns and how she puts them on her front porch.   In March of 2021, I bought my first Staghorn Fern - a six-inch container from Home Depot for $10.  In that post, I talked (again) about Martha .  I kept this one in the container and moved it outside during the Summer where it spent a few months on our front porch - just like Martha.  Because I left it in the container, I decided to drill a bunch of hole...