Why I Oughta...

For the past few years (planted in 2019), we've had a creeping/crawling Juniper shrub planted in a patio container out back.  I put it in this container and attempted to prune it a little bit and wire it up when I was focused on trying my hand at bonsai .   Two years later (Spring of 2021), I was seeing some wire damage and (for now) abandoned the project .  My thought was....let this thing grow a bit more, then let's revisit it for pruning and shaping as it is more mature.   On a recent walk in the backyard, I came across (or...really...'noticed') this shrub in the container and I was (temporarily) alarmed.  Look at it in the photo below.  It is maroon-ish/green.  Or, I suppose, one could view it as greenish/maroon-ish/brown-ish/grey-ish?  Is that a color? (That is a lot of 'ishes'.) I snapped that photo and then went looking back in the garden diary here.  I found this post from two years ago - December of 2020 .  Good news:...

I have an idea for a garden-related project that has been knocking around my head for a number of years.  Well...there are tons of those kind of projects, frankly.  But, for this post, I'm talking about one of them specifically.  This one...involves trees.  And...I haven't moved on it - for a variety of reasons including shifting priorities, lack of need, the right nursery stock and the opportunity.   It starts with this post about Hollywood Junipers in 2018 where I posted a photo of a tree in a wooden box for a container .  And, was likely rekindled during one of my trips to Tokyo where I saw all sorts of container'd conifers.  Like this one from House of Bonsai below: Via House of Bonsai . This is not my photo. And, even more recently, I came across a couple of striking conifer trees by the bus stops down at Disney Springs.  They were relatively new (newly planted) and still had their tags on them. Here's a shot of them below: And, below, ...

We have a pair of dwarf Umbrella container plants that Nat has had around the house for a couple of years.  One of them had prime placement on our kitchen table.  The other was neglected up in our spare bedroom between last Summer (2020) and this Winter (Jan/Feb 2021).  The one on our kitchen counter has been something we look at all the time, so I've been pruning it pretty regularly by lop'ing off the tips to try to push some new side growth.  Properly known as Schefflera arboricola ,  that particular Umbrella plant is thick and full from a few inches off the soil all the way to the top.  The pruning has worked.   The other one - the neglected one - was shaped like a lollipop.   It was angled and top-heavy.  The first thing I did was to dig it up, transplant it and straighten it out.  Then, I began to prune it.  All from the top, hoping that it would push out some new growth further down the trunk. Here's a post in m...

I had four bonsai-related items on my 2021 to-do list for the yard and garden .  One of them - Number 10 -  was to buy some pre-bonsai materials that I can purchase as smaller stock (and thus, lower prices) to use in later seasons.  Number 10 on the list reads: That idea of buying some pre-bonsai is something that I've done before by buying nursery stock and sticking it directly in the ground.  The guys at Bonsai Empire have a page up about pre-bonsai where they give you some tips on how to do it; including what to kind of look for when buying nursery stock.  I currently have three pre-bonsai junipers that I've picked up over the years - two in the ground and one in a larger container .  My plan for this year - #8 on the list - is to 'work' those three this season.  That means digging them up, pruning them a bit and likely sticking them back in the ground to overwinter in their pots at the end of the season.   But, this post isn't about ...

Back in February, when I was at the end of the line in terms of wanting to deal with snow, I posted something that amounted to a bonsai wish list (or to-do list) for the season.  It was a way to get my brain thinking about what the Spring and Summer will look like and a coping mechanism after all the snow.  (Listen...I'm not normally someone who hates Winter.  But, February...and ALL.THE.SNOW was, umm, a bit much.) So, out of that post , I mentioned that I wanted to do a few things including utilizing the existing nursery stock that I have on hand, acquire more for future use, dig up a 'found' bonsai (American Elm), take a bonsai class and...create a bench or table for the trees.   I've looked around (briefly) on the Web to figure out the right way to display bonsai and it seems like if you are interested in learning more about the topic, stop number one on your journey should be this Bonsai Empire post that talks how to display trees and gives some tips. ...

A week ago, I shared a photo of a dwarf umbrella potted plant that I straightened out by repotting it in a slightly larger pot and giving it a haircut to try to push some lower growth.  The plant was growing at an odd angle - leaning towards the light after being neglected for months and by repotting it, I was able to stand it up straight.  But, it was still top-heavy.  Hence, the haircut. Based on my experience with our OTHER umbrella plant, I've found that if I cut off the leaders, two things happen:  first, it usually flushes out some lower growth and second, the part that I cut has some die-back...about a half-an-inch. So, when I lop'd off the leader, I left a little bit to account for the die-back.   And today? There's some good news.  First, near the top.  Here's a look at the tiny new growth that has appeared next to the top cut.  The stress of the pruning has flushed this new growth.   But, there's more.  Down the trun...

Yesterday, I posted my bonsai dreaming for the year and mentioned that one of the items on my 2021 bonsai mini-list was to try a tropical bonsai like a ficus or umbrella.  It was #8 on that list , but I'll start with it here on the blog.  For beginner bonsai hobbyists, a couple of other very common tropical to try is Dwarf or Mini Jade and Chinese Elm.  Those are interesting, but I think I came across something else that might be more my speed. I was poking around on some bonsai nurseries sites and came across a tropical called a dwarf podocarpus.  Here's the listing (below) on Brussel's Bonsai : Source via Brussel's Bonsai product listing. The common name for this is Buddhist Pine - Podocarpus macrophyllus - and is talked about in various bonsai places on the Web.    This list from Bonsai Outlet talks the benefits of giving this particular cultivar a shot.  That includes : Tolerates temperature variances.  Hard to train.  Produces cones ...

I started working my very first bonsai experience back a couple of years ago with a nursery-stock cypress tree that I ended up killing.  I pruned it far too hard and pushed it the first year and it dried out and died.  That same Summer (2019), I bought a few other nursery stock junipers and decided to give them a very light pruning and left them alone.  I dug a couple of them IN the ground , in their pots and put another one in a large container on the patio .  I brought that large container into the screened porch this fall and removed much of the wire that had been on this tree (because it was growing AROUND the wire).  But, the time in from the weather was short lived.  It turned out to be infested with fungus gnats (or something similar) and after figuring things out, I pushed it back outside hoping that a hard frost would kill off the gnats.  Today, that pot is totally covered in snow.  Here's how it looks after being piled on for the past ...

Yesterday, I posted a photo and talked about this 'unknown Juniper' that is in a large container on our patio.  In that post, I mentioned the other two Junipers that I have in the ground - Youngstown and Chinese.  I bought them as small $5 nursery stock from Home Depot and at kept them around the patio all season while I tried (it was hard) to NOT prune them too much.  My goal is to work them into tree-form as I learn (just a little bit) about bonsai.   I've documented my "bonsai journey" over the past few years on the blog and you can find those posts here .  I've learned (and killed) from one tree and have tried to be patient.   At the end of the season, I read that it is smart to dig them into the ground to overwinter them in their containers (people do this with all sorts of bonsai pots).  So, that's what I did:  dug up a couple of holes, stuck the junipers - pots and all - directly in the ground, covered them and tried to mulch the...

 On our back patio, we have a container with a small conifer that I'm not sure the cultivar.  I bought it last year and worked on it a little bit - as there is some wire on parts of it - but I'm not sure which kind of juniper it really is at this point.  I have two junipers - Youngstown and Chinese - that I have in containers that I planted in the ground .  My plan is to dig them up next Spring and give them another haircut/style.  My Bonsai journey has been one of buying some nursery stock initially and KILLING my first one.  In a matter of months.  Due to over-pruning it, I think.  As a result of that experience, I've kinda taken the 'lazy bonsai' route on these - by giving them an initial wiring up and then planting them (in their containers to restrict the roots) in the ground (or in this case in a larger container).  By next year, all three will hopefully able to handle a little bit of pruning. Here is the unknown Juniper that has grown...

Earlier this year, I bought a couple of small (less than $10) junipers at the Home Depot and began to prune them a little bit to make them into a shape that would be more bonsai-like.  This year, I just started my bonsai-journey with a small Cypress - and overpruned it.  It ended up dying.  I think it was a combination of OVER-pruning and putting it into a bonsai pot prematurely so it dried out.  I decided to learn my lesson with these two other junipers:  A Youngstown Juniper .  And a Chinese Juniper .  With both of those, I cleaned up some of the limbs and established a clear leader.  I didn't do any wiring or cleaning up of the roots.  But, instead left them in their nursery containers.  We live in Zone 5B - in Northern Illinois - so we have a couple of choices with Winter coming: 1. Overwinter bonsai in climate controlled environment. Ideally in a place that keeps the temperature right at 34 degrees. Greenhouse or quons...

Last year, I discovered a few smallish, but growing trees that had been through some heavy pruning in our yard.  The previous owner had cut most of the little cluster of trees back to stumps at some point before we acquired the property.  Two or three of them are tall (15' or so) and I couldn't figure out what they were, so I sent a few photos in to the U of Illinois Master Gardener program .  They identified them as American Elm trees and provided some details about Dutch Elm Disease and pests that weaken these trees.  With my recent interest in bonsai including the purchase of a few pieces of nursery stock ( here , here  and here) , I've discovered that one of the *other* ways to get bonsai trees is through the collection of natural bonsai species.  Or...what I think they call "Pre-Bonsai" species.  Collecting bonsai (or...again pre-bonsai) is about going out in nature, finding and selecting potential trees that can be dug up and potted....

Yesterday, I posted a photo of the Youngstown Juniper that I bought at Home Depot to work into a bonsai tree and mentioned that I also picked up another tree.  Here's that tree:  A Chinese Juniper 'Pfitzeriana Aurea'.  Same deal:  from Home Depot in Darien in a #1 pot that cost less than $10.  Above you can see the tree that includes some gold-ish needles in the new growth.  Below, you can see a close-up of the tag. This will be a tree that I'll work on in a similar fashion to the Youngstown Juniper.  I'm aware that since these things are so small that the trunks are very thin - and it is going to take a LONG time to work this into anything substantial.  But...it is a cheap way for me to work on some pruning techniques, right? This will make three nursery stock trees that I've started.  I also have identified a tree on our property - it is a cut-down of one of the American Elms that the U of I Master Gardener identified - that I a...

Back on May 7th of this year, I shared a couple of photos and talked about my initial excitement of giving the art of bonsai a shot with a piece of nursery stock that I picked up at Home Depot for $10 .  It is a Cypress Hinoki and had one large(ish) trunk that seemed to have decent trunk taper, very little reverse taper and priced so cheaply that if I killed the poor thing, I wouldn't be that upset. In that initial post, I talked about how I was following some of the Mirai Bonsai Basics video directions and started with the roots and trunk.  More recently, I moved on to the next few steps and began to try to prune the Cypress into a bonsai of sorts. I know that every article you read talks about how you aren't supposed to prune more than 30% of the tree at any one time and that pruning an evergreen like this Cypress is best done in the late fall when it the tree is heading to dormancy.  But, I couldn't, umm, help myself.  I dove right in. I began by prun...

Back in the beginning of May, I posted a few photos of a piece of nursery stock from Home Depot that was a Cedar tree and talked about how I was beginning to go down the bonsai journey .  At the time, I knew that I was better off pulling some cheap ($10) pieces off the shelf from Home Depot, work them a bit and see what happens versus say...buying an *already* trained and pruned bonsai tree.   Then, just last week, I posted an update on how I think I might have GONE TOO FAR with my first tree .   I pruned the heck out of it.  And..I worked the roots.  Doing both at the same time is not a good idea, but I have to say...live and learn.  Right?  That Cedar tree is basically done for the season.  I've put it in a bonsai pot and now I am just keeping an eye on it with water - which...the pot that I put it in has a tray below it - and that meant that the water ran through the pot, but was sticking around underneath it...thus keeping the fe...

With my past few trips to Japan for work, I've increasingly become interested in Japanese-style gardening and the art of bonsai.  I've been thinking about the large-scale conifers that I saw across Tokyo like this one and these pines in the outer gardens of the Imperial Palace  and thinking about how I can bring something like *that* to our yard as we grow our conifer collection. At the same time, my visit to the Morimae Bonsai Shop in Ginza along with subscribing to a few bonsai YouTube channels like Heron's Bonsai out of London  and Mirai Bonsai's Beginner Series has sparked my interest in the art of bonsai. This video that talks about nursery stock material selection from Mirai Bonsai pushed me to head to Home Depot to see if I could find something I could buy that was inexpensive to try my hand at shaping a small tree. My bonsai journey starts with this Cypress Hinoki that you see in the photo above.  Bought at Home Depot for $9.98, this Cypress is go...

As I've mentioned in a few different posts in the past month or so, I've been increasingly drawn into bonsai videos on YouTube.  Thanks to their recommendation algorithm, I've been wandering into a bonsai rabbit hole and have, I think, come to the conclusion that I should try my hand at some form of bonsai.  So, on my recent trip to Tokyo, I decided to seek out some bonsai in person.  I came across this post on Bonsai Empire that recommended this small shop called Morimae Bonsai in Ginza that was just a few blocks away from my hotel.  That story mentioned that the store was small and recommended a trip upstairs.  I wandered over there and found the place and I went in.  It *was* small and had one person working in the place behind a counter.  The Bonsai Empire piece mentioned an upstairs, but I didn't notice any stairs, so I was stuck just looking around the little shop.  They had about a half dozen trees in the store and some tools.  ...