Why I Oughta...

Cut flower season has arrived with the first Cut-and-Come-Again Zinnias.  These three followed the first Dahlia that I showed yesterday - a Melina Fleur Dahlia .  These were direct sown seeds and are being over-shadowed by what I'm pretty sure is Nicotiana Jasmine stalks.  I might have to thin those out to keep these happy - not to mention the Disneyland Roses that are tucked back in there. I did exactly what their name implies:  cut them.  Here's to...ummm...coming again. These took a little more than four weeks from seeds being sown to the first cut flowers. 

Out in the front yard, I am seeing my first Dahlia bloom of the season:  a Melina Fleur Dahlia that is (right now) short and stout with the bloom nestled in amongst the dark green foliage.  These were planted outdoors about six weeks ago after being started in nursery pots indoors .  I left this one on the plant (for now), but hope to cut some of these as they pop-off in the coming weeks.   Below is a look at the first Dahlia bloom of the season - the Melina Fleur Dahlia:

A few days ago, I posted an update on our Cardoon - with its purple, spikey (but soft) bloom on the largest bud .  Today?  That first bloom is joined by two others that have all taken on a thistle-like form.  That means the primary bloom is just over a week-old (from when it first opened) and appears to have some staying power.   To say that this plant is dramatic is an understatement.    I could see it in the middle of a large container - like these .  

Yesterday, I shared the details of a template that I cut out of Masonite and a circumference tool that will shape the form of the floor of my wood-fired oven.  In order to get the inner arch opening correct, I opted to create a second drawing jig - one that is 20.25" wide that will set the width of that opening.   The goal was to draw the outline of the oven floor, but it proved harder (for me) than I thought it might be when I started. Before I get into the process of getting the oven floor drawn, a quick mention on firebricks.  The community on FornoBravo spec's "Medium-Duty Firebricks" for the floor and dome.  After poking around online, I've come to discover that Illinois is home to the Alsey Refractory - in Alsey, Illinois.  Somewhere between Springfield and St. Louis is the Alsey Refractory ; where they've been making firebricks in the USA for more than 100 years.  A few towns over, a materials dealer - LaGrange Materials - sells Alsey firebricks.  The

Last week, I showed the final form of the raised hearth - after I stripped the concrete-pouring forms from the four sides and talked about how I can now move-on to actual oven building.    For me, that started with creating a template out of Masonite.  I bought an 8x4' sheet and created a little circle-drawing jig that I cabbage'd together out of spare parts I had on hand.  The sheet is just 48" wide and after thinking about it, I've decided to make a 40" oven (interior diameter), which means the outside footprint diameter is 49".  That meant that I'm going to be a half-inch shy on either side.  That's ok.   I also needed to figure out where the dome meets the inner arch.  I started by attaching the circle-drawing-jig to the center of the board and drew out a 40" and 49" circle.  Then, I started to think about my arch sizes and how the inner/outer arch differ.  I chose to go with a 20-1/8th" inner arch width.   That meant that I could

The small, volunteer Northern Catalpa tree that is growing up on one corner of our patio had a three-leader situation going on in June.  Catalpas are whirl'd - which means they show growth out of three points, so having three leaders isn't surprising.  About three weeks ago, I made the decision to cut-off two of them and then forgot about it.  It didn't take long, but the small tree reacted VERY STRONGLY to the leader situation being sorted and has shot up about a foot in the past two weeks.  Here, below, is a look at the tree as it sits currently: I'll note that the peak is right above the tips of the Karl Foerster Feather Reed Grasses.  Looking back at September 2023 - late last Summer - this same tree was coming in a foot-or-so below the grass tips and I measured it at 41" tall. What is it now - after this growth spurt?  65" tall to the top of the foliage.  24" growth since September of 2023 - and most of it (I think) in the past couple of weeks.

Over the past few days, our Cardoon (planted IB2DWs in full sun) has begun to bloom.  I posted a pre-bloom photo last week and talked about how I had to fend of aphids and bag worm to get to this point .  The first purple, pointed bloom emerged from the largest artichoke-like bud in the center of the plant.  It started small and soft-to-the-touch.  No smell at all (at least that I could detect).   Below is the first morning of the bloom.   Below is a wider-view of all the buds that will (hopefully) follow the first one: And, below is an even wider-view of the plant - showing how it is planted close to our driveway. The next morning, the initial bloom opened-up wider.  Below are a couple photos showing the second day of the Cardoon flower bloom: