Why I Oughta...

Right around this time every (early) March, the green tips of a set of daffodil bulbs emerge from the mulch in the bed behind the secondary Northern Red Oak tree.  These were inherited - and I didn't plant them.  I've observed them over the years - as far back as our first Spring here (2018) -  and here's last year's post .  They have flowered exactly ONCE.  Just once - in 2021 .   Will they bloom this year?  I doubt it.

I planted a pair of Matcha Ball Ash Leaf Spireas in my burst of [Fall Planting] last October.  One in the front yard and the other by the Fanal Astilbes along the southside of the backyard border.    I was out puttering around in the back and noticed a flash of green on the tips of the shrub.  A closer look showed me that the buds on this shrub were/are opening up.   This is the first Spring for this thing, so I'm glad to see it coming back and (seemingly) survive the winter cold.  Below is a close-up photo of the buds and then a wider photo showing the overall structure:

Well...things are STARTING to happen in my 3rd, storage bin in our three-bin compost setup.  That third bin (which I put up last year) is a storage bin full of non-mixed material.  It is LOADED with last season's fall leaves as well as where I've been stashing our kitchen scraps.  Most recently, I topped it off with all of the cut-downs from our ornamental grasses. Three things have happened all in the past week or so that have managed to move things along in this bin. First, I applied a top-layer of municipal biosolids.  Both as material to balance the browns (I'm considering biosolids to be a green due to their high nitrogen content) as well as a WEIGHT due to their mass . Then...(on accident), some of the bin caught on fire . (eek). And, now, have a look at the bins.  In particular, look at the level of the storage bin on the left.  The top of it is now BELOW the top of the frame: Look back at this post from a week ago when the biosolids and grass clippings were mounded

In mid-October, I transplanted a groundcover plant (Burgundy Glow Ajuga) from one of the kid's container fairy gardens into the small foundation bed outside of our screened porch door .  It has a massive set of roots that I had to man-handle to get out of the container and that likely put the plant under a lot of stress.   Then...the cold temperatures arrived and it appears that this plant didn't have much time to recover and put down any new roots in its new home.   Here's what it looks like today (below).  It did NOT handle the cold temperatures as well as some of my other Ajuga colonies. Now...a closer inspection reveals that ALL might NOT be lost.  My eye spies a small (maybe quarter or less of the plant) that appears to have healthy (although winter-damaged) foliage.  That *might* mean that it can come back as the temperatures warm up.  I'll be keeping an eye on it in the next few weeks to see if it wakes up.  I'm going to try to apply some biosolids in/around

With excavation started on the site of our backyard wood-fired pizza oven (on our drywell) , I need to move from the theoretical (What could an oven look like?  How high should it be?  What would it need to be made out of?  How many cinder blocks? What layout?) In my recent post on excavation , I ran through some mental math to figure out what size the hole needs to be, what size the slab will be and how wide the block foundation will be once constructed.  I ran through both a 10x8x16 block scenario and an 8x8x16 block scenario.   The 8x8x16 is the traditional block, but I was considering if the extra 2" block in the first (one or two) courses is appropriate to all for the footing of a brick face on the sides of the oven. Off I went to Menards to poke around in the construction block section.  Back in January, I posted the details of how there are L-shaped cinder blocks that help make proper corners and I wondered if I should be using those to make a square pizza oven stand .    I

Last year, I started to learn how to put together cuttings from our garden into countertop arrangements .  I made a number of them from late Summer to Fall that were primarily anchored by the Disneyland Floribunda roses.   By the end of the season, I came the conclusion that I needed to get outside of my foliage-gardening 'comfort zone' and start to add some flowers.    On a late-season whim (sale), I planted a few new (to me) flowering perennials including May Night salvia , coneflowers and some Agastache 'Blue Fortune' to the front IB2DWs beds.   I also pulled the trigger on a small dahlia tuber order from Longfield - where I pre-ordered some Melina Fleur (Decorative) and Cornel Bronze (Pompon) tubers .  My (current) plan is to put those in by the Disneyland Roses on the side of the house.    I also bought some Cut-and-Come-Again Zinnia seeds that I'd like to start inside and move to my containers in the back  - to replicate the look of a  combo of Zinnias and E

Last week, I posted the details and photos of the first late-winter application of municipal biosolids in our garden and talked about how I was going to try to find some time to head to the mulch pit to get a few loads before gardening season heats up.  I applied that initial load to some areas that needed the soil amendment including the Spring Grove Ginkgos, the epimedium colony and my Hellebores.   I mentioned (in that post) that for every spot that I dumped a bucket of biosolids, I spotted 2x more spots that could use a top-dressing.  Not to mention the lawn, the parkway and the compost bins.   Over the weekend, I ran out and picked up another load.   About 8 five-gallon buckets filled up 2/3rds-of-the way.  And dumped and spread out around the backyard.   I added another partial-bucket under the Linden trees: And, right at the base of my bird feeder pole: At regular intervals along the front of the south border: Around the trunk of the south-side Northern Red Oak tree went a coup